Lingenfelter L460240000 Lingenfelter NCC-002 Nitrous Control Center v1.5 - Manual (Page 12)

Lingenfelter NCC-002 Nitrous Control Center Installation and Operating Instructions 11
2 Parts List
Quantity Description Item ID/PN
1 NCC-002 Nitrous Control Center NCC-002
1 USB drive loaded with NCC-002 software
1 6ft USB 2.0 A Male to Mini-B 5pin Male 28/24AWG Cable w/ Ferrite Core (Gold
Plated) MONO-8634
4 Self-tapping screws, #6 99663A156
26 Slotted ring terminal, 16-22 AWG DK321288
1 LPE 9" decal L920010000
2 LPE bumper stick & sponsor decal, 10-3/4 x 3-1/4" L920180000
1 Binder
1 Instructions
2.1 Additional Required Components
Description Item ID/PN
Nitrous solenoids
Fuel solenoids (unless supplying fuel by other means)
Nitrous tank
Nitrous bottle heater
Nitrous filter
2.2 Tools & Materials Required
•
Wire stripper
•
Wire crimper
•
Heat shrink tubing
•
Heat source for heat shrink tubing (heat gun, lighter, etc...)
•
Phillips head screwdriver
•
Wires of various color, length, and gauge
•
Electrical connector pin removal tool