Lingenfelter L460240000 Lingenfelter NCC-002 Nitrous Control Center v1.5 User Manual
Page 136
Advertising
Lingenfelter NCC-002 Nitrous Control Center Installation and Operating Instructions
135
Enabling the MPH Enable Option disables the log data feature of the NCC-002 until the Arming Input is engaged
and the desired vehicle MPH is achieved.
Once the MPH Enable option is enabled, you will be sent back to the Data Log Menu where you can either press
the "BACK" button to exit or the "ENTER" button to adjust the MPH Enable Percent and Hysteresis Percent
settings. Refer to
Appendix D: Glossary of Terms
for an explanation of how a hysteresis works.
Access from the Computer Program:
From the
Status screen
, press the "Data" button. The "MPH ON" settings are found in the "Data Log Enable
Parameters" dialog box under the "Options" Tab.
Advertising