Lingenfelter L460240000 Lingenfelter NCC-002 Nitrous Control Center v1.5 - Manual (Page 127)

Setup Menu 126
Menu selection is highlighted, and then press the “ENTER” button. Press the down arrow until the "Fuel PSI Max
Value" selection is highlighted and then press the "ENTER" button. Use the “LEFT” and ”RIGHT” arrow buttons
adjust the setting. Press the “SAVE” button to accept the new setting or press the “ESC” button to exit with no
change.
Access from the Computer Program:
From the
Status screen , press the "Setup" button. The "Sensor Max PSI" option is found in the "Fuel Sensor
Setup" dialog box under the "Fuel Sensor" Tab. Click the "UP" and "DOWN" arrow buttons or type in any
numeric value in the valid ranges shown above.
Fuel Pressure Option / Fuel PSI Nitrous Disable
Enabling the Fuel Pressure Option will allow the flow of nitrous to be disabled based on a user defined fuel
pressure.
Access from the Controller:
From the Main screen press the “SETUP” button, press the “DOWN” arrow button repeatedly until the Fuel PSI
Menu is highlighted and then press the “ENTER” button. Press the "ENTER" button to select the "Fuel PSI"
option, then the “YES” or “NO” button to change the current selection. If the “NO” button is pressed no change
will be made.
Access from the Computer Program:
From the
Status screen , press the "SETUP" button. The "Fuel Pressure Nitrous Disable" option is found in the
"Fuel PSI Nitrous Disable" dialog box under the "Fuel Sensor" tab. Click to "ON" button to enable the Fuel
Pressure Nitrous Disable option or "OFF" to disable the option. If the option is enabled, Click the "UP" and
"DOWN" arrow buttons or type in any numeric value to change the settings.