Lingenfelter L460240000 Lingenfelter NCC-002 Nitrous Control Center v1.5 - Manual (Page 86)

Lingenfelter NCC-002 Nitrous Control Center Installation and Operating Instructions 85
7 Setup Menu
The following sub-sections detail the various features and settings located in the Setup Menu on the controller,
which can be accessed by pressing the far right navigation button on the NCC-002 controller. Some of these
options include using various sensors, vehicle RPM, or vehicle speed to control the arming of the system. Other
options in the Setup Menu, such as the Analog Output feature, allow the NCC-002 to control other devices.
7.1 Erase Data Log
This setting allows the user to manually erase the last data log from the NCC-002.
Access from the Controller:
From the
Main screen , press the “SETUP” button. Press "ENTER" to select the "Erase Data Log" menu
selection. Press the “YES” or “NO” button to change the current selection. If the “NO” button is pressed, the data
log will not be erased.
Access from the Computer Program:
From the
Status screen , click on the Eraser Icon in the toolbar. Click "YES" to erase the data log from the
controller or "NO" to abort the operation.