Lingenfelter L460240000 Lingenfelter NCC-002 Nitrous Control Center v1.5 - Manual (Page 138)

Lingenfelter NCC-002 Nitrous Control Center Installation and Operating Instructions 137
8 User Program Files, Data Logs, and Other Software Options
The following sub-sections detail the procedures used to transfer data logs and programs between the Nitrous
Control Center computer program and the NCC-002 controller. This chapter also explains how to view the data
log files that are created by the controller. These options are exclusive to the computer software program, so
the controller will not have the following options available. i.e.- The controller cannot ask for saved programs or
data logs from the computer.
8.1 Managing User-Defined Programs on the Controller and the Computer
The following options allow the user to manage the programs that are saved into memory on the NCC-002
Controller, as well as those on the computer.
"Program Start" User Program
This option allows the user to choose whether the default user program file or the last user program file opens
when the computer program first opens.
Access from the Computer Program:
From the Status screen , click on the "Options" button in the upper left-hand corner of the window, and then drag
your mouse over the "Program Start" button. Finally, click on either the "Load default user program" button or
the "Load last user program" button.
Open User Program File
This option allows the user to open a saved user program file which can then be modified and/or flashed to the
controller.
Access from the Computer Program:
There are three (3) ways to open a saved User Program File, denoted below by the bullet points.
•
Press Ctrl+O
•
From the Status screen , click on the File button in the upper left-hand corner of the window, then click on the
"Open User Program File" button.