Lingenfelter L460240000 Lingenfelter NCC-002 Nitrous Control Center v1.5 - Manual (Page 91)

Setup Menu 90
Timer Output Option
The Timer Out function can function in either a timed output mode or as an RPM controlled window switch
output.
Access from the Controller:
From the
Main screen , press the “SETUP” button. Press the “DOWN” until the "Timer Output" menu selection is
highlighted and then press the “ENTER” button. Press the "ENTER" button to select the "Time-Based" option
and press ether the “YES” or “NO” button to change the current selection. If the “NO” button is pressed no
change will be made.
Access from the Computer Program:
From the
Status screen , press the "Timer" button. The "Time based" option is found in the "Timer Output
Control Method" dialog box under the "Options" Tab. Click "Time Based" to enable the timer-controlled output
or "RPM Based" to enable the RPM-controlled output.
Timer Hold