Lingenfelter L460240000 Lingenfelter NCC-002 Nitrous Control Center v1.5 - Manual (Page 97)

Setup Menu 96
Access from the Computer Program:
From the
Status screen , press the "SETUP" button. The "TPS Activation Enable" option is found under the
"TPS Input" Tab. Click "ON" to enable the TPS Activation Enable feature or "OFF" to disable the feature.
Activation Percentage
The TPS Activation Percentage setting determines the TPS percent at which system activation will occur based
on TPS alone (other activating criteria must also be met).
The Valid Range is 10% to 100% in 0.1% increments.
Access from the Controller:
From the
Main screen , press the “SETUP” button. Press the “DOWN” arrow button repeatedly until the TPS
Setup Menu selection is highlighted, and then press the “ENTER” button. Press the down arrow until the
"Activation%" selection is highlighted and then press the "ENTER" button. Use the “LEFT” and ”RIGHT” arrow
buttons adjust the setting. Press the “SAVE” button to accept the new setting or press the “ESC” button to exit
with no change.
Access from the Computer Program:
From the
Status screen , press the "Setup" button. The "Activation Percent" setting is found in the "TPS
Activation Percent" dialog box under the "TPS Input" Tab. Click the "UP" and "DOWN" arrow buttons or type in
any numeric value in the valid ranges shown above.
Hysteresis Percentage