Lingenfelter L460240000 Lingenfelter NCC-002 Nitrous Control Center v1.5 - Manual (Page 119)

Setup Menu 118
disable the option. If the Hall Input is turned "ON" in the computer software program, the user will also have the
ability to enable either stage of nitrous via the vehicle MPH. In order for the controller to accurately read the
vehicle MPH, the Pulse Per Mile setting must be calibrated correctly.
Nitrous1 and Nitrous2 MPH Activation Option
This option allows the user to enable or disable MPH activation control for the Nitrous1 and Nitrous2 Channels.
Access from the Controller:
From the Main screen press the “SETUP” button, press the “DOWN” arrow button repeatedly until the Hall Input
Menu is highlighted and then press the “ENTER” button twice. Press the "DOWN" arrow button until either the
Nitrous1 or Nitrous2 MPH Activation option is highlighted, then press "ENTER". Press the “YES” or “NO” button
to change the current selection. If the “NO” button is pressed no change will be made.
Access from the Computer Program:
From the
Status screen , press the "SETUP" button. The "Nitrous1 MPH Activation Enable" and "Nitrous2 MPH
Activation Enable" options are found in the "MPH Setup" dialog box under the "Hall Input" tab. Click "ON" to
enable the MPH option or "OFF" to disable the option.