Lingenfelter L460240000 Lingenfelter NCC-002 Nitrous Control Center v1.5 User Manual
Page 116
Lingenfelter NCC-002 Nitrous Control Center Installation and Operating Instructions
115
Access from the Computer Program:
From the
Status screen
, select the relay by pressing either the "Relay1" button or the "Relay2" button. The
"RPM Enable" option is located in the "Relay Control Options" dialog box. Check the box to enable the RPM
Control Option or un-check the box to disable the option.
MPH Control Option
If this option is enabled, the selected Relay output is controlled by the vehicle MPH and any other control options
that are enabled.
Access from the Controller:
From the
Main screen
, press the “SETUP” button. Press the “DOWN” arrow button repeatedly until the desired
Relay Menu is highlighted and then press the “ENTER” button. Press the "ENTER" button to select the "MPH
Control" option, then the “YES” or “NO” button to change the current selection. If the “NO” button is pressed no
change will be made.
Access from the Computer Program:
From the
Status screen
, select the relay by pressing either the "Relay1" button or the "Relay2" button. The
"MPH Enable" option is located in the "Relay Control Options" dialog box. Check the box to enable the MPH
Control Option or un-check the box to disable the option.
Fuel Pressure Control Option