Lingenfelter L460240000 Lingenfelter NCC-002 Nitrous Control Center v1.5 - Manual (Page 117)

Setup Menu 116
If this option is enabled, the selected Relay output is controlled by the Fuel pressure and any other control
options that are enabled.
Access from the Controller:
From the
Main screen , press the “SETUP” button. Press the “DOWN” arrow button repeatedly until the desired
Relay Menu is highlighted and then press the “ENTER” button. Press the "ENTER" button to select the "Fuel PSI
Control" option, then the “YES” or “NO” button to change the current selection. If the “NO” button is pressed no
change will be made.
Access from the Computer Program:
From the
Status screen , select the relay by pressing either the "Relay1" button or the "Relay2" button. The "Fuel
PSI Enable" option is located in the "Relay Control Options" dialog box. Check the box to enable the Fuel
Pressure Control Option or un-check the box to disable the option.
Nitrous Pressure Control Option
If this option is enabled, the selected Relay output is controlled by the Nitrous pressure and any other control
options that are enabled.
Access from the Controller:
From the
Main screen , press the “SETUP” button. Press the “DOWN” arrow button repeatedly until the desired
Relay Menu is highlighted and then press the “ENTER” button. Press the "ENTER" button to select the "N2O
PSI Control" option, then the “YES” or “NO” button to change the current selection. If the “NO” button is pressed
no change will be made.
Access from the Computer Program:
From the
Status screen , select the relay by pressing either the "Relay1" button or the "Relay2" button. The
"Nitrous PSI Enable" option is located in the "Relay Control Options" dialog box. Check the box to enable the
Nitrous Pressure Control Option or un-check the box to disable the option.