Lingenfelter L460240000 Lingenfelter NCC-002 Nitrous Control Center v1.5 - Manual (Page 148)

Lingenfelter NCC-002 Nitrous Control Center Installation and Operating Instructions 147
Load NCC User Program from Data Log
This feature allows the user to extract the settings that were used on the controller when the data was read from
the controller. This allows the user to not only be able to view the data log, but to also be able to save the
settings that were used on the controller when the data was read to the computer. If the controller settings are
changed after the data log took place but before the data log was read to the computer, the data log user
program settings will reflect the controller settings when the data was read from the controller, not
when the data was logged. For this reason, it is crucial that the data log is saved to the computer immediately
after the data is logged so that the user program settings truly reflect the settings from when the data log took
place, not from when the data log was uploaded to the computer. This feature is especially useful in the event
that troubleshooting takes place because it gives the troubleshooter the ability to possibly reproduce the issue.
For racers, it allows you to go back to a previous known configuration, as well as to test and compare the logged