3 timer setup menu – Lingenfelter L460240000 Lingenfelter NCC-002 Nitrous Control Center v1.5 User Manual
Page 90
Lingenfelter NCC-002 Nitrous Control Center Installation and Operating Instructions
89
Right-clicking on the graph will display a menu from which the graph can be manipulated as well, as shown
below.
See
Appendix B: Nitrous & Fuel Operation
for more information.
7.3
Timer Setup Menu
The Timer Out is a +12 volt output that can be controlled by the NCC-002 based on time or engine RPM.
The following options are available in the "TIMER SETUP" menu. If the Timer Output Option is set to a time
based output, the "Timer Delay" and "Timer Duration" settings will appear in the "Timer Output Menu", as shown
below. If the Timer Output Option is set to an RPM controlled window switch output, the "Timer On RPM",
"Timer Off RPM", and "RPM Hysteresis%" settings will appear in the "Timer Output Menu".
Access from the Controller:
From the
Main screen
, press the "Setup" button. Scroll down until until you find the "Timer Setup Menu"
button and press the "ENTER" button.
Access from the Computer Program:
From the
Status screen
, press the "Timer" button.