Lingenfelter L460240000 Lingenfelter NCC-002 Nitrous Control Center v1.5 User Manual
Page 52
Lingenfelter NCC-002 Nitrous Control Center Installation and Operating Instructions
51
The program will ask you to confirm that you want to update the Controller software. Click yes to continue on to
installation.
As the flashing of data between the computer and the controller takes place, a series of addresses should
appear in the write address dialog box of the Update Status window. During this time, the NCC FLASH utility is
reading the flash data from the controller and saving a backup in case the flash that will be sent to the controller
in the next step is corrupt.
Once the computer has read the flashed data from the NCC-002 controller, the program will ask for the location
of the firmware update that is to be installed onto the controller. Locate the directory where the .NCC file is
saved, which may be the LPE-supplied media or the directory to which the program was downloaded from the
LPE website. The picture below shows the .NCC file located on the desktop. Click on the file and click the
"Open" button to confirm your selection.