Oritron Dionex Ion Chromatography System ICS-2100 - Manual (Page 261)

C • TTL and Relay Control
Doc. 065291-01 3/09
249
Connect the Analog Output
1. Locate the analog cable for the third-party analog-to-digital converter and
controller.
2. Connect the analog input connector on the third-party controller to the
ANALOG OUTPUT connector on the ICS-2100 rear panel (see Figure C-6 ).
Configure the ICS-2100 Analog Output
Go to the ICS-2100 DETECTOR touch screen page and select the settings shown in
Figure C-9 :
Create an AS Method and Schedule
Figure C-10 is an example of AS method timed events that can be used with the
TTL/Relay connections shown in Figure C-6 .
Figure C-9. Detector Page
Figure C-10. Example AS Method for Stand-Alone Operation
Help Prompt
METHOD: TIMED EVENTS
1 1 1
TIME
INIT LOAD
INJECT 0.00
VALVE TTL1 TTL2 RLY1 RLY2
1
CSV
0 0 1 0.50