E.12 how do i know when a column is dirty, E.13 how do i clean a column, E.14 why is the conductivity high – Oritron Dionex Ion Chromatography System ICS-2100 User Manual
Page 269
E • FAQ
Doc. 065291-01 3/09
257
E.12 How do I know when a column is dirty?
See the troubleshooting section of the column manual.
E.13 How do I clean a column?
See the troubleshooting section of the column manual.
E.14 Why is the conductivity high?
Possible reasons for high conductivity include:
•
The suppressor is not on. Turn on the suppressor from the Chromeleon
Control panel or the ICS-2100 touch screen
SUPPRESSOR
page.
•
The suppressor needs regeneration. See the suppressor manual for
troubleshooting information. The suppressor manual is included on the
Dionex Reference Library CD-ROM (P/N 053891).
•
The cell is out of calibration. See
for calibration instructions.
•
See
for additional troubleshooting information.
E.15 How do I configure and operate the auxiliary valve?
See Installing the ICS-1100/ICS-1600/ICS-2100 Auxiliary Valve (Document No.
065288), provided in the Auxiliary Valve Kit.