Tektronix Phaser 600 - Manual (Page 126)

P R I N T I N G F R O M A P C
1 1 0
5 Select the port to which your printer is connected.
The printer’s configuration page contains the information you need to set
up the printer’s port. Refer to
Printing the configuration page for instructions
on printing a configuration page.
N O T E
You can use the FILE port to save a document to a PostScript file instead of sending
it to the printer. For more information, see your Microsoft Windows documentation.
Interface Select Then do the following
Parallel LPTx Go to Step 6.
Network Network port
(
LPTx or COMx )
1. Click the Network button to open the
Printers-Network Connections dialog box.
2. Fill in each item based on your configuration, then
click OK .
Refer to your Microsoft Windows documentation
for details, or ask your network administrator for
help.
Serial COMx Set up the serial port.