Tektronix Phaser 600 - Manual (Page 266)

P H A S E R C O P Y S T A T I O N
2 5 0
Printing A-size images on A-size media
The printer’s default media size cannot be set to A-size, nor can A-size be selected
in the printer’s front panel. If you are copying an A-size image to print out on A-size
media, follow these steps:
1 On the printer’s front panel, access the Media Size selections in the Media
Defaults menu.
2 Select ANSI B, which is the smallest media size selectable from the front
panel.
3 On the Copystation’s front panel, press the Scale button.
4 Using the keypad on the Copystation, enter 83% (the amount necessary to
scale a B-size image to A-size).
5 Manually feed an A-size sheet of media into the printer.
6 Place the item to be copied on the scanner window at the lowest, right-most
position
7 Press the Copystation’s Copy button to make a print.