Setting up the printer on a network for windows nt – Tektronix Phaser 600 User Manual
Page 77
Advertising
P C / W
I N D O W S
S O F T W A R E
6 1
Setting up the printer on a network for Windows NT 3.5 and 3.51
TCP/IP Connection
AppleTalk Connection
Note
Windows NT 3.5 and 3.51 include network software called Services for Macintosh (AppleTalk) and
TCP/IP print services (for TCP/IP; lpr print services). Refer to your Windows NT manual for instructions
on installing this network software. After this software is loaded, follow these steps:
1.
Select
Create a new printer
in the
Print Manager
; select the appropriate
printer driver.
2.
Select
Other
in the
Print to
field of the From the
Printer Properties
dialog box.
3.
Select
LPR Port
for
Available Print
Monitors
; click
OK
.
3.
Select
AppleTalk Printing
Devices
for
Available Print
Monitors
; click
OK
.
Advertising