Tektronix Phaser 600 - Manual (Page 572)

O C C A S I O N A L C L E A N I N G
5 5 6
Exposing the fuser shuttle
N O T E
If you have not already removed the media roll, do it now.
1 To open the exit cover,
push the latch (
a , on the
lower right side of the
printer)
DOWN , while
holding the exit cover
handle (
b ); slowly rotate the
cover down. The fuser
shuttle (
c ) is visible on the
far right, inside the printer.
W A R N I N G
When lowering the exit cover, be careful not to pinch your hand between the paper
roll cover and the exit cover.
a
b
9480-118
c