Tektronix Phaser 600 - Manual (Page 194)

A L L A B O U T M E D I A
1 7 8
The front panel displays this message after it
has processed a job:
N O T E
On a network where the printer is usually using
roll media, select
Manual Feed in the driver, wait for the front panel to display this
message, then unload the roll media and load the cut-sheet. If cut-sheet media is
usual or if the printer is connected to a single computer, you can load the cut-sheet
media at any time after the roll media is unloaded.
8 Press the front panel’s Continue button; the printhead begins printing. Wait
until the printer ejects the first sheet before inserting another sheet.
9480-12.CD.4
Load <size> Sheet
Pause Continue Cancel