Enabling automatic language selection – Tektronix Phaser 600 User Manual
Page 542
C
H A N G I N G
T H E
P R I N T E R
’
S
L A N G U A G E
M O D E
5 2 6
Enabling automatic language selection
Use the
AIS.PS
file to change a port to automatic language selection. After you
copy this file to a port, the printer accepts PostScript or HP-GL files on that port.
The port’s language change is persistent across print jobs and across printer power
cycles. To use automatic language selection, send the
AIS.PS
file to the printer.
1
Locate the utility files on the Phaser 600 printer’s CD-ROM; refer to
2
Use one of the following methods to send the
AIS.PS
file to the printer:
■
PC users
: Use the DOS
COPY
command to send the file to the printer.
(Windows 3.1 users can also use the
Copy
command in the
File
Manager
.)
■
Workstation users:
Send the file to a printer as you would any
PostScript file.