Tektronix Phaser 600 User Manual
Page 665
Advertising
P
R I N T E D
C O L O R S
A R E
N O T
W H A T
Y O U
E X P E C T E D
6 4 8
5
Select one of the following files from the list, then click
Open
. (These files
were installed in the
Phaser 600 Utilities
folder, inside the
PhaserTools
folder.)
■
Select
Setscreen On
to enable setscreen operations.
■
Select
Setscreen Off
to disable setscreen operations.
6
At the prompt
Save PostScript output as:
you are asked for a file name
for saving printer output. Use either the default name given in the edit box or
type a new name.
7
Click
Save
to send the file to the printer.
8
If no output is returned by the printer, the
LaserWriter Utility
displays a dialog
box; click
OK
to continue.
Advertising