Setting up the phaser 600 printer driver – Tektronix Phaser 600 User Manual
Page 89
M
A C I N T O S H
S O F T W A R E
7 3
Setting up the Phaser 600 printer driver
Note
Phaser 600 driver is a Tektronix-modified version of Apple’s LaserWriter 7.1.2 printer driver. Use it if you are
using System Software 6.0.7, or 7.0 and later. It is the easiest driver to use.
1.
After installing the printer’s software, including the
Phaser 600 Driver
(
Chooser
from the
Apple
menu.
2.
Click on the
Phaser 600
printer driver icon on the left side of the
Chooser
.
3.
Click on the
Zone
for your printer. See your network administrator if you have questions.
4.
Click on your
Phaser 600
printer in the list of printers on the right side of the
Chooser
. If it
is not in the list, check your hardware connections and which zone you have selected in the
Chooser
.
5.
Close the
Chooser
.