Tektronix Phaser 600 - Manual (Page 694)

C L E A R I N G A N I N K J A M
6 7 7
If an ink stick doesn’t drop completely
1 Use tweezers to lift the ink
stick out of the printhead
or
use a pen or pen-like object
to push the ink stick into the
printhead.
2 If you have trouble reaching
an ink stick, you can slide
the keyplate up for better
access.
C A U T I O N
A belt in the ink loader may be out of position after an ink jam. Do not try to reposition
it or you may damage the ink loader. The belt resets to the correct position when the
next ink stick is loaded.
9480-33
1
2