Tektronix Phaser 600 - Manual (Page 587)

E M P T Y I N G T H E W A S T E B I N
5 7 1
Front panel displays Empty Waste Bin
N O T E
The waste bin is locked during
normal operation. Do not pull the
bin out unless the front panel
message is displayed.
1 Remove the waste bin by
sliding it out. You may have to
tug
gently on the waste bin to
remove it.
2 Empty the contents of the waste
bin by gently twisting it while
holding it over a trash bin.
3 Replace the waste bin in the printer.
C A U T I O N
Do not load used ink into the printer. Reusing waste ink ruins the printhead and
invalidates the printer warranty.
9480-13