Macintosh utility file: configuration page – Tektronix Phaser 600 User Manual
Page 719
Advertising
P
R I N T I N G
T H E
C O N F I G U R A T I O N
P A G E
7 0 2
Macintosh utility file:
Configuration Page
N O T E
If you are using QuickDraw GX, you can use the Tektronix Phaser 600 GX driver to
print a copy of the configuration page.
1
Install the utility files from the Phaser 600 printer’s CD-ROM; see
for instructions.
2
Select the appropriate printer in the
Chooser
.
3
Locate the
LaserWriter Utility
in the
PhaserTools
folder on your hard disk, and
double-click its
icon to start the application.
4
Choose
Download PostScript File
from the
Utilities
menu.
5
Select the
Configuration Page
file from the list, then click
Open
. (This file was
installed in the
Printer Utilities
folder, inside the
PhaserTools
folder.)
Advertising