Clamp rollers – Tektronix Phaser 600 User Manual
Page 568
Advertising
O
C C A S I O N A L
C L E A N I N G
5 5 2
Clamp rollers
The clamp rollers are located behind the drum.
Clean them when you notice ink offsetting or
ink smears on your prints.
1
Use a foam swab from the cleaning kit that
has been moistened with 90% pure
isopropyl alcohol.
2
C
lean the surface of the roller by rubbing it
with the swab.
3
Rotate the drum away from you (toward the back of the printer); this rotates
the clamp rollers. Clean the entire surface of the roller.
C A U T I O N
Do not pull the roller away from the drum; the metal that attaches it to the printer is
very flexible and can be permanently bent.
4
Repeat Steps
for each of the rollers.
9480-21
2
3
Advertising