Tektronix Phaser 600 - Manual (Page 616)

S Y M P T O M S A N D S O L U T I O N S
5 9 9
The front panel menu
exits and returns to
Ready without anyone
pressing the
button.
Front panel timeout: if no
activity occurs in 5 minutes,
the front panel returns to
Ready .
Press Menu to enter the front panel
menu.
Front panel reports:
Clear <Location> Jam
Media jam. Remove the jammed media. See
Clearing a media jam .
Media is too thick or too thin. Use recommended media. Refer to All
about media for more information.
Using Letter-size cut-sheet
media (ANSI A, ISO A4, and
Arch A) or smaller. Use media at least B-size for better feed
reliability.
Roll media is not cut evenly or
smoothly. Make sure that the cutter is sharp; use a
new blade in the cutting tool for manual
cutting.
Front panel reports:
Clear Ink Loader Jam
An ink stick has jammed in the
ink loader. Remove the jammed ink stick. See
Clearing an ink jam .
Troubleshooting quick reference (cont'd.)
Symptom Possible Causes Solution