Tektronix Phaser 600 - Manual (Page 525)

B I - D I R E C T I O N A L S T A T U S R E P O R T I N G
5 0 9
N O T E
The printer is shipped with the uni-directional mode enabled.
1 Follow the instructions in PC/Windows software to install the printer’s software.
Select Easy Install to automatically install the software, or select the Printer
Utilities item in the Custom Install: Utilities window.
2 Locate the files in the PHSR600 subdirectory, inside the PHSRTOOL directory
created on your hard disk by the installer application.
3 Select one of the following files.
■
Use the BIDIR.PS file to enable bi-directional status reporting on a
parallel port.
■
Use the UNIDIR.PS file to disable bi-directional status reporting.
4 Use one of the following methods to send the desired file to the printer:
■
PC users : Use the DOS COPY command to send the file to the printer.
(Windows 3.1 users can also use the Copy command in the File
Manager .)
■
Workstation users: Send the file to the printer as you would any
PostScript file.