Tektronix Phaser 600 - Manual (Page 176)

A L L A B O U T M E D I A
1 6 0
Roll media
The maximum image area is the entire
requested page size, up to the limits of the
roll width. The image’s origin point (0,0) is
5 mm from the media edge. If the
requested page size is the same width as
the roll, 10 mm of the image will be
clipped.
If the media runs out while making a print,
the whole page is printed when a new roll
is installed.
Any size media roll is fully printable up to
the width of the roll, minus the side margins
(totalling 10 mm). This illustration shows a 36-inch media roll with the maximum
width image.
■ Hint: If you have files that do not set the page size, set the printer’s default
media size in the front panel.
9480-75
900 mm (35.6 in.)
5 mm
(0.2 in.)
5 mm
(0.2 in.)
(0, 0)