Tektronix Phaser 600 User Manual
Page 633
Advertising
S
Y M P T O M S
A N D
S O L U T I O N S
6 1 6
Print quality problems
Symptom
Solution
Off-set ink dots
Clean or replace the fuser wheel.
To save your print, as well as the cost and time of having to resend the
job:
■
If the ink dots appear in the white space on your print, use an eraser to
carefully remove the ink.
Prints have dull, faded
colors
Check the selected color correction mode.
Clean the printhead from the front panel Utilities menu. Refer to
.
Make sure that
Media Fusing
is turned on and try setting it to
Cold
.
Streaks or spots
Clean the
Clean the
Back tension blade and paper clamp
.
Clean the paper clamp (
Clean the exit rollers (
Fuser shuttle and exit rollers
).
Clean the fuser wheel or replace the Fuser Kit components (
).
Clean the
.
Advertising