Tektronix Phaser 600 User Manual
Page 612
F
R O N T
P A N E L
M E S S A G E S
5 9 5
Initializing...
No user action required. Wait for a period of time (up to
approximately 10 minutes).
Clear Fuser Jam
Clear Exit Jam
Clear Entrance Jam
Clear Internal Jam
1.
Cut the media, if roll media is loaded.
2.
Open the top cover and use a pen to move the printhead to the
right side.
3.
Open the exit cover and move the fuser to one side.
4.
Remove the jammed media.
Refer to
for detailed instructions.
Clear Ink Loader Jam
Open the ink loader cover and remove the jammed ink stick(s).
Receiving...
No user action required.
Processing...
No user action required.
Wake Up
Press any front panel button
or send a print job to bring the printer
to
Ready
(after warming up).
Warming Up...(XX min)
No user action required. The printer will be ready in the specified
amount of time (more if cleaning cycle is required).
Front panel messages (cont'd.)
Message
Action