Cleaning the transport rollers – Tektronix Phaser 600 User Manual
Page 559
Advertising
Q
U I C K
C L E A N I N G
5 4 3
Cleaning the transport rollers
1
To open the exit cover, push the latch (
a
, on
the lower right side of the printer)
DOWN
,
while holding the exit cover handle (
b
);
slowly rotate the cover down.
W
A
R
N
I
N
G
When lowering the exit cover, be careful not to
pinch your hand between the paper roll cover and
the exit cover
2
Using a lint-free cloth that has been moistened
with isopropyl alcohol (or a pre-soaked alcohol
cloth), gently wipe each of the transport rollers
to remove any dust or residue.
3
Rotate each roller to make sure that you clean
its entire surface.
a
b
9480-116
9480-67
Advertising