Tektronix Phaser 600 - Manual (Page 544)

T E S T I N G P R I N T E R L A N G U A G E M O D E C H A N G E S
5 2 8
Testing HP-GL mode
HPGLTEST.PLT is an HP-GL file that prints a single line of text if the printer is
operating in HP-GL mode.
Send the HPGLTEST.PLT file to the printer after you send the HPGL.PS or AIS.PS file ,
to make sure the language change was made correctly.
1 Locate the utility files on the Phaser 600 printer’s CD-ROM; refer to Installing
the files for instructions.
2 Use one of the following methods to send the HPGLTEST.PLT file to
the printer:
■
PC users : Use the DOS COPY command to send the file to the printer.
(Windows 3.1 users can also use the Copy command in the File
Manager .)
■
Workstation users: Send the file to the printer as you would any
utility file.