Tektronix Phaser 600 - Manual (Page 671)

F O N T S P R I N T I N G I N C O R R E C T L Y F R O M W I N D O W S
6 5 4
Getting printer configuration information
If you are not sure which printer configuration you have, press and hold down the
button on the printer’s front panel for configuration and amount of memory. Printer
information appears on the lower line of the display.
■ For standard configuration (17 fonts), the display reads:
Config: Standard 8/24/40MB.
■ For the Extended Features configuration (39 fonts), the display reads:
Config: Extended 8/24/40MB.
You can also print a copy of the printer’s startup page. Refer to Printing the startup
page for instructions.
Refer to PC/Windows software for complete instructions on installing the printer and
drivers.