Tektronix Phaser 600 - Manual (Page 692)

C L E A R I N G A M E D I A J A M
6 7 5
4 Remove the jammed media. For all types of media jams, always inspect
the drum and rollers for any loose paper and remove it.
If paper extends outside the
exit cover:
OR
If paper does not extend
outside the exit cover:
OR
If paper is only visible inside
the top cover:
■
Close the exit cover.
■
Gently and evenly pull the
media out of the exit path.
■
With the exit cover open,
remove the jammed media.
■
Pull the back tension blade’s
handle toward you and hold it
in that position; this lifts the
blade away from the drum
and releases the jammed
media.
■ Remove the media by pulling
it out of the printer.
9480-92 9480-85 9480-83