Tektronix Phaser 600 - Manual (Page 575)

O C C A S I O N A L C L E A N I N G
5 5 9
Cleaning the fuser shuttle
1 If you have a small vacuum or air
canister, use it to remove the
paper dust.
2 Clean the belt (near the foam
oiler wheel) with a
dry , lint-free
cloth.
3 If you notice ink in the fuser
shuttle area, wipe it with a foam swab that has
been moistened with 90% isopropyl alcohol.
C A U T I O N
Be careful not to get any alcohol on the front and
rear rails of the fuser shuttle or the “shelf”
underneath the shuttle. It is oiled for smooth travel
and the alcohol will remove the lubricant.
9480-26
9480-24