Tektronix Phaser 600 User Manual
Page 632
S
Y M P T O M S
A N D
S O L U T I O N S
6 1 5
Problems with image size and position
Symptom
Solution
Cut-off images
Check your application for image sizing.
Make sure that you are using a printer PPD file and have selected the
correct page size. If you select the incorrect page size, the image may
be cut off.
Make sure that the media selected in the driver is the same as or smaller
than the media installed.
If you selected
Page Centering
in the driver, make sure that media is
loaded
before you send the print job; otherwise, the default media
setting calculates the centering position.
Image shifts or
margins are incorrect
(Macintosh)
Make sure that you have installed the printer driver or the correct PPD file
onto your Macintosh so that you can select the correct page sizes from
the driver. For details on how to print from a Macintosh, refer to