Tektronix Phaser 600 - Manual (Page 37)

S E T T I N G U P T H E P R I N T E R
2 1
Removing the shipping blocks
C A U T I O N
The shipping blocks inside the exit cover must be removed before turning on the
power; otherwise you will damage the printer.
1 Open the exit cover:
a Push down on the latch.
b Use the exit cover handle to
rotate the cover down.
W A R N I N G
When lowering the exit cover, be careful not to pinch your hand between the paper
roll cover and the exit cover.
a
b
9480-116