Tektronix Phaser 600 - Manual (Page 192)

A L L A B O U T M E D I A
1 7 6
Manual Feed: using cut-sheet media
1 You can select Manual Feed in the printer driver. You can also feed the cut-sheet
media as it is needed, without selecting Manual Feed in the driver.
2 Unload any roll media by lifting the latch on the top cover. Open the paper roll
cover to rewind the media completely onto the roll.
N O T E
If the printer senses that roll media is installed (it looks to see if any media is covering
a sensor located under the paper roll cover), it may not print the correct image area.