Tektronix Phaser 600 User Manual
Page 678
Advertising
M
E D I A
H I N T S
A N D
T I P S
6 6 1
■
Make sure that the leading edge of the roll media is
straight (the angles on the corners of the leading
edge should be 90˚). If it is not, follow these steps:
1
Open the paper roll cover.
2
Lift the latch on the top cover (make sure that you
leave the cover closed).
3
Insert the roll media under the top cover. Align the
media with the guide on the printer to make sure
that it is inserted evenly.
4
Lower the top cover latch to secure the media.
9480-117
1
2
3
4
9480-90
Advertising