Tektronix Phaser 600 - Manual (Page 735)

E N A B L I N G A N D D I S A B L I N G T H E S T A R T U P P A G E
7 1 8
PC utility file: STARTPG.PS/NOSTRTPG.PS
1 Follow the instructions in PC/Windows software to install the printer’s software.
Select Easy Install to automatically install the software, or select the Printer
Utilities item in the Custom Install: Utilities window.
2 Locate the files in the PHSR600 subdirectory, inside the PHSRTOOL directory
created on your hard disk by the installer application.
3 Select one of the following files:
■
Use the STARTPG.PS file to enable printing of the printer’s
startup page.
■
Use the NOSTRTPG.PS file to disable the printer’s startup page.
4 Use one of the following methods to send the desired file to the printer:
■
PC users : Use the DOS COPY command to send the file to the printer.
(Windows 3.1 users can also use the Copy command in the File
Manager .)
■
Workstation users: Send a file to the printer as you would any
PostScript file.