Fusing – Tektronix Phaser 600 User Manual
Page 353
Advertising
U
S I N G
T H E
P L U G
-
I N
3 3 7
Fusing
■
Select from the options in the pop-up menu.
■
The Fusing options work on any media type. The default setting is Cold.
■
None:
Prints may look lighter, with more white paper visible around the
printed dots. The inks may be less durable if they are not fused.
■
Cold:
Flattens the dots, adding dot gain, and making colors look
darker. Cold fusing also makes printed colors more resistant to flaking.
This mode is optimized for use with the TekColor Color Correction
options.
■
Hot:
Softens the wax and flattens the printed dots. On roll media, Hot
overrides the Advance Media setting, and always adds 8.875 inches of
blank paper after each page printed.
Advertising