Setting up a postscript driver for windows nt 3.5 – Tektronix Phaser 600 User Manual
Page 74
P C / W
I N D O W S
S O F T W A R E
5 8
Setting up a PostScript driver for Windows NT 3.5 and 3.51
Note
The Windows NT driver does not support the PhaserMatch application. Refer to
for information on drivers that do.
You may need your original Windows NT setup diskettes (or CD-ROM) to complete this procedure.
1.
If your computer has an Intel-compatible processor, such as the Intel I386, go on to Step
.
If your computer is a MIPS, Alpha, or PowerPC, edit the
PRINTER.INF file (located in the
WIN95_95 directory on the printer’s CD-ROM or in the top level of the Windows 95/NT diskette).
a.
Copy these files to a new, formatted diskette,
placing them at the top (root) level of the
new diskette.
TEK1
PRINTER.INF
TKPH6001.PPD
Standard configuration
TKP600P1.PPD
Extended Features option
Note
Press and hold down the printer’s
button on the front panel for configuration information.
b.
Open the copy of the
PRINTER.INF file on the new diskette in a text editor such as Notepad.
c.
Locate the following section in the
PRINTER.INF file:
[ProductType]
STF_PLATFORM = I386