Tektronix Phaser 600 - Manual (Page 32)

S E T T I N G U P T H E P R I N T E R
1 6
Moving the printer to its operating location
After removing the printer from the
shipping pallet, you can wheel it to its
operating location. When doing so,
follow these guidelines:
■ To move the printer, make sure that
the casters are unlocked (the
locking lever should be
up ).
■ The casters on the printer are
designed for rolling on smooth,
inside surfaces.
■ Make sure that you have access to
all sides of the printer while you are
setting it up.
■ Allow 30 cm (12 in.) from the wall to accommodate the ink loader.
C A U T I O N
To reduce the possibility of damage to the ink loader, position the rear of the printer
against a wall, rather than an aisleway.
9498-99