Tektronix Phaser 600 - Manual (Page 56)

I N S T A L L I N G T H E S T A R T E R P A P E R R O L L
4 0
Loading the paper roll
1 Open the paper roll cover.
2 Lift the paper roll holder out of the printer. Notice
that each end of the holder is unique:
a The left side of the holder (closest to the ink
loader) has a removable plastic nut and
endcap.
b The right side of the holder (closest to the
front panel) has a fixed endcap.
N O T E
The endcaps are set up for media rolls with a
three-inch core; if you are using media on a two-inch
core, the endcaps can be adjusted. Refer to
Using a
2-inch core media roll: removing the core adapter for
instructions.
9480-07
9480-66
b
a