Macintosh users – Tektronix Phaser 600 User Manual
Page 511
F
O R M A T T I N G
A
S C S I
H A R D
D I S K
4 9 5
Macintosh users
1
for instructions on installing the printer’s files.
2
Select the appropriate printer in the
Chooser
.
3
Locate the
LaserWriter Utility
in the
PhaserTools
folder on your hard disk, and
double–click its
icon to start the application.
4
Choose
Download PostScript File
from the
Utilities
menu.
5
Select the
Format Printer Disks
file from the list, then click
Open
. (This file was
installed in the
Printer Utilities
folder inside the
PhaserTools
folder.)
6
At the prompt
Save PostScript output as:
you are asked for a file name
for saving printer output. Use either the default name given in the edit box or
type a new name.
7
Click
Save
to send the file to the printer.
8
If no output is returned by the printer, the
LaserWriter Utility
displays a dialog
box; click
OK
to continue.
If output is returned by the printer, you won't see this dialog box; check your
hard disk for the file the utility created for the printer's output.