Enabling and disabling job pipelining – Tektronix Phaser 600 User Manual
Page 475
E
N A B L I N G
A N D
D I S A B L I N G
J O B
P I P E L I N I N G
4 5 9
Enabling and disabling job pipelining
The job pipelining utility files offer faster print job throughput for high volume
printing environments. When job pipelining is turned on, the printer begins
processing a second print job before completely finishing the current print job.
Job pipelining is turned
on
by factory default for the parallel port and optional serial
port, and is turned
off
by factory default for all network ports.
N O T E
If you enable job pipelining, a mismatch can occur between the job currently printing
and a status message displayed for a previous print job. The mismatch occurs when
a print job already closed (but not completely printed) develops a problem and
reports an error during a subsequent print job.
Click on the following topics for more information:
■
Enable/disable job pipelining from a Macintosh
■