Tektronix Phaser 600 - Manual (Page 584)

O C C A S I O N A L C L E A N I N G
5 6 8
Cleaning the printhead
If your prints have missing dots or a missing horizontal line, clean the printhead,
using the front panel menu function:
1 Press the Menu button on the front panel.
2 Press an arrow button ( ---> ) until the front panel displays this message:
Utilities
<--- ---> Menu
3 Press the Menu button.
4 Press an arrow button until the front panel displays this message:
Clean Head
<--- ---> Select
5 Press the Select button.
The front panel displays messages while it cleans the printhead; this takes
approximately 5 minutes.