Tektronix Phaser 600 - Manual (Page 565)

O C C A S I O N A L C L E A N I N G
5 4 9
3 If you are using a dry cloth, moisten it with 90% pure isopropyl alcohol.
4 Pull forward on the back tension blade’s
handle and hold it in that position; this
lifts the blade away from the drum.
5 Use your fingers to hold the cloth
against the tool. Position the tool under
the blade; it notches onto the blade to
serve as a guide, cleaning the front and
back of the blade at the same time.
6 Clean one section of the blade by wiping
back and forth 3-4 times with pressure.
7 Switch hands to clean the other end of
the blade.
N O T E
If the blade is especially dirty, you may need to add more alcohol to the lint-free cloth
or use a new cloth.
9480-19
4
5
6